 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/TRI/SWT860390/B/12/06/2001 Relais Statique Triphase Three Phase Solid State Relays * Relais synchrone sortie AC Pret a l'emploi * Commande 90-240VAC . LED. * Protection interne par RC et ecreteur de tension . * IP20 * Zero cross AC output. For all types of loads * 90-240VAC control voltage with LED * Internal protection by RC and clamping voltage. * IP20 Dimensions / Dimensions: page 1 / 3 F/GB SWT860390 24 to 520 VAC - 3 x 5 ARMS Circuit equivalent/Equivalent circuit : 100 72 L1/R Adaptateur / Adapter 83 LED U L2/S 25 A1 = A2 Adaptateur / Adapter V L3/T Adaptateur / Adapter W Caracteristiques de commande (a 20C) / Control characteristics (at 20C) AC-DC Parametre / Parameter Symbol Min Nom Max Tension de commande / Control voltage : DC Uc 90 240 Tension de commande / Control voltage : AC Uc 90 240 Courant de commande / Control current (@ Uc ) Ic 4,5 11 Tension de relachement/Release voltage Uc off 15 Resistance interne / Input internal resistor fig.1 Rc 21 Tension inverse / Reverse voltage Urv polarity free Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/ Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Unit VDC VAC mA V K V VRMS VRMS V fig. 1 :Caracteristique d'entree / Control characteristic fig1 : Caracteristique d'entree / Control characteristic 12 9 Ic (mA) 6 3 0 0 20 40 60 8 0 100 120 140 160 180 200 220 240 Uc (V) Conditions Symbol Typ. 500 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SWT860390/B/12/06/2001 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Conditions Tension de charge / Load voltage Plage tension de fonctionnement / Operating range ( 480Vrms + 10% ) Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Ie nom Courant nominal AC-51 non permanent/ AC-51 no permanentnominal current ( see Fig. 2 ) ( see Fig. 2 ) Courant nominal AC-51/ AC-51 nominal current @25C Courant nominal AC-53/ AC-53 nominal current ( see Fig. 2 ) Puissance max (moteur triphase) Max 3 pole motor power (400 VAC) Puissance max (moteur triphase) 3 pole motor power(400VAC)/EN60947-2 Courant de surcharge non repetitif /Non repetitive overload current tp=10ms (Fig. 3) Chute tension directe crete/ On state voltage drop @ Ie nom Courant de fuite etat bloque/ Off state leakage current @Ue, 50Hz Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Uc nom DC ,f=50Hz Temps d'ouverture/ Turn off time Uc nom DC ,f=50Hz Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level IEC 1000-4-4 (burst) EMC Test d'immunite conduite / Conducted immunity level IEC 1000-4-5(schocks) Conformite / Conformity EN60947-4-x Caracteristiques thermiques / thermal curves : 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 page 2 / 3 F/GB Symbol Ue Uemax Up Usync Ua Ie AC-51 Ie AC-51 Ie AC-53 Pn Pn Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t Typ. Unit 400 V rms 530 V rms 1200 V 12 V 10 V 25 A rms 3x5 A rms 12 A rms 2,2 kW 1,1 kW 230 A 1,4 V <3 mA 5 mA 30 ms 30 ms 10-400 Hz 500 V/s 50 A/s 265 A2s 4kV criterion A 2kV crit.A Full on -state Total wasted power (W) 70% duty cycle heatsink max =100C 50% duty cycle 30% duty cycle heatsink max = 80C in compliance with EN60947-1 Fig.3 Courbes de surcharge de courant / Overload current curves Surge current Itsm (Apeak) = f(t) for Itsm =230A 250 Itsm (Apeak) 200 150 100 50 Repetitive Itsm (Apeak)=f(t) 5 RMS load current (A) 10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature (C) No repetitive Itsm (Apeak)=f(t) without voltage reapplied 0 with voltage reapplied for initial Tj =70C 0,01 0,1 t(s) 1 10 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SWT860390/B/12/06/2001 page 3 / 3 F/GB SVT 1 Cablage commande / Wiring of the control circuit: nombre de fils/ NUMBER OF WIRES 2 SCREWDRIVER TYPE tournevis tournevis MINIMUM TORQUE couple serrage SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,8 x 5,5 mm POZIDRIV 2 1,2 SVT 1 Cablage puissance / Wiring of the power circuit: NUMBER OF WIRES 2 SCREWDRIVER TYPE tournevis tournevis MINIMUM TORQUE couple serrage SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 1,5 ... 10 mm2 1,5 ... 6 mm2 1,5 ... 10 mm2 1,5 ... 6 mm2 0,8 x 5,5 mm POZIDRIV 2 1,8 R S T R S T R S T Resistive or inductive load M Application typique /Typical application: celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SWT860390
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |